Connecting ships to charging stations is a bit of a hassle when you are out at sea. But with a new magnetic charging plug for boats – it is about as easy as putting a cup in a cup holder.
By Hege Tunstad - Published 27.04.2026
Electrical connections hate salty seas, but a new magnetic plug makes charging on the open sea a possibility. Charging a ship at sea could therefore become about as easy and common as charging a car along the E6 highway.
Battery-powered offshore vessels could then keep on working, without having to travel long distances to a port to charge. Just one trip to shore would drain the battery during transport.
We are primarily talking about electric SOVs (Service Operation Vessels) that maintain offshore wind farms. But one can also imagine using other types of ships, such as supply ships in the oil industry, called Platform Supply Vessels (PSV).
Relentless nature and meticulous precision
It is challenging to set up charging stations at sea. But some companies have already made a start. Including Vard.
“Movement and wear make charging at sea challenging when using a classic plug-based connection. Mechanical wear and tear, corrosion and demanding maintenance increase the risk and costs,” says Håvard Vollset Lien at Vard, who heads the large Ocean Charger project.
Magnetic magic replaces vulnerable plugs
We cannot control the weather and waves, but what about the connection plug itself? Can we find a smarter solution there?
This is precisely what scientists and engineers in the Ocean Charger project have been working on.
Movement and wear make charging at sea vulnerable when using a classic plug-based connection. Mechanical wear and tear, corrosion and demanding maintenance increase risk and costs.
“We’ve looked at a lot of solutions here, says Giuseppe Guidi, a senior research scientist at SINTEF.
“And we’ve tested a possible solution that works almost like a regular electrical contact. But we can avoid all the problems because we transfer the power inductively by encapsulating the plug itself in materials that can withstand just about anything.”
In principle, the concept is magically simple: classic contacts that corrode are swapped out for magnetic fields.
Charging without a physical connection of contacts with bare metal provides good protection against nature’s corrosive elements.
Like putting a cup in a cup holder
Mounted on the cable coming from the charging station (like a wind turbine) is a coil, safely encapsulated in a waterproof material that is not affected by salt or algae. A similar coil, equally well protected, is mounted on the ship.
Researchers at SINTEF have designed and tested the component that is at the very heart of the charging system: the inductive charging coil. Here, the current is transferred without physical contact via a magnetic field when the coils are close to each other.
“It won’t be necessary to be precise when lowering the plug into the receiver hole,” says Guidi.
“It’s almost like putting a cup in a cup holder. It will fit no matter which way it is turned. Very plug and play,” he says.
This new plug will provide a faster, safer and more stable connection – every time.
Transferring power wirelessly to the battery on a ship may sound quite simple. In practice, it requires a whole chain of technical solutions that work in sync and be cost-effective, safe and practical.
The power must first be converted from alternating current to direct current, sent at high voltage through a flexible cable, and then converted to high-frequency current that can be transmitted via magnetic fields. On board, the power must be captured, converted again, and sent safely into the battery.
It’s almost like putting a cup in a cup holder. It will fit no matter which way it is turned. Very plug and play.
Special cables, a smart control system, and components that can withstand both high power and rough conditions are essential for these steps to work effectively. Only when all these puzzle pieces fall into place does magnetically coupled fast charging at sea become possible.
Guidi notes two areas in particular that the team has been working on. One is the electromagnetic design. How the coil is wound and which materials are used are critical to enabling the system to provide high power on a small surface.
The other focus area is the control system. An intelligent management system is needed to ensure that energy loss is minimal.
Safe charging regardless of weather
The goal has been to achieve an efficiency that is at the same level as charging with an electrical contact, but with the enormous advantage of being maintenance-free and robust. And the designers have succeeded in this.
“The genius of charging at sea in this way is that the electrical energy produced locally is used directly to charge the ships, which ensures that very little energy is wasted,” says Vollset Lien.
Even when the wind is not blowing, charging can be ensured through intermediate storage of electricity in an Offshore Substation, or “OSS hub.”
“The OSS hub functions as an electrical hub out at sea, collecting electricity from the wind turbines and making it possible to charge vessels directly, without travelling to shore.”
The genius of charging at sea in this way is that the electrical energy produced locally is used directly to charge the ships.
In the long term, project manager Håvard Vollset Lien at Vard envisions that this type of charging solution could be used to establish a charging infrastructure along the entire Norwegian coast.
“Perhaps one day it will become a common sight for electric service vessels and coastal vessels to charge their batteries at sea and out in the shipping lane,” he says.
Facts about the project and technology:
The Ocean Charger project, led by Vard, aims to put into place the complete maritime value chain for offshore wind, and to enable zero-emission ship operations offshore.
The project aims to develop, simulate and test a full-scale charging solution that enables ships to charge at offshore wind farms. Offshore charging is economically advantageous, and the technology is ready for use. The technology enables zero-emission operation of offshore wind farms.
The project is funded by the Research Council of Norway, SIVA and Innovation Norway through the Green Platform initiative.
Partners are Vard Design AS, Vard Electro AS, Seaonics AS, REM Offshore AS, Solstad Offshore ASA, SINTEF Energi AS, SINTEF Ocean AS, DigiCat, Sustainable Energy, Equinor ASA, Source Energi AS, Corvus Energy AS, Plug AS, Shoreline AS, Maritime CleanTech, Marine Energy Test Centre AS, University of Bergen and NORCE.
An expanded group representing the entire value chain has now prepared a memorandum that has been submitted to the British authorities. In it, they state that offshore charging of service vessels for offshore wind farms is technologically mature and commercially ready. However, design and commercial agreements for energy access are still needed before the solutions can be put into use.
Link to project page:
Ocean Charger - Maritime value chain for offshore wind with offshore energy transfer - Norce
Current technical articles:
Analysis of Scaling Characteristics for Inductive Power Transfer Coils | IEEE Conference Publication | IEEE Xplore
High power and power density inductive charging system for buses and heavy-duty vehicles