Breaking the Trade-Offs: A New Electron-Transport Layer Advances Efficient, Flexible, and Cost-Effective Organic Solar Cells
en-GBde-DEes-ESfr-FR

Breaking the Trade-Offs: A New Electron-Transport Layer Advances Efficient, Flexible, and Cost-Effective Organic Solar Cells

16/11/2026 ScholarCAST

Organic solar cells are attracting increasing attention for lightweight, flexible, and semitransparent energy applications. Although their power conversion efficiencies have improved significantly, combining high efficiency with long-term stability, mechanical durability, and affordable manufacturing remains challenging. Electron-transport layers (ETLs) play an essential role in addressing these limitations by controlling electron extraction, interfacial charge recombination, and device stability. However, conventional organic ETLs often face difficulties related to poor solubility, excessive crystallization, and chemical degradation.

To overcome these challenges, researchers from Ulsan National Institute of Science and Technology (UNIST) and the Korea Advanced Institute of Science and Technology (KAIST) published a study in Nano-Micro Letters entitled “Polar-Twisted Electron-Transport Layer Simultaneously Breaks Efficiency-Flexibility-Cost Limits in Organic Solar Cells.” The team developed a new perylene diimide (PDI)-based electron-transport material, H75-DMA, using a molecular design that combines a twisted backbone with bulky polar side groups. This strategy improves material processing, interfacial stability, and mechanical properties, enabling high-performance solar cells across several device configurations.

The key innovation lies in controlling how PDI molecules interact and form thin films. Conventional PDI-based ETLs tend to stack strongly, producing highly crystalline and sometimes uneven films that can compromise interfacial stability. Some also require acidic additives to improve their solubility in alcohol-based solvents. By introducing bulky polar groups into the PDI molecular framework, the researchers reduced excessive molecular aggregation and enabled additive-free alcohol processing.

H75-DMA consequently formed smoother and more uniform films, with a surface roughness of only 0.221 nm. The improved interface supports efficient electron collection and helps suppress unwanted charge recombination. In optimized binary organic solar cells based on the PM6 active layer, H75-DMA enabled a power conversion efficiency of 20.07%, demonstrating its potential for high-efficiency photovoltaics.

Importantly, the new material also showed improved resistance to chemical degradation. Conventional ETLs can be damaged by reactive oxygen species during exposure to air and light, leading to interfacial defects and performance losses. The molecular structure of H75-DMA reduces these degradation pathways and helps maintain stable charge transport. In unencapsulated D18-Cl solar cells, approximately 80% of the initial efficiency was retained after 384 hours of air storage, outperforming devices using conventional reference ETLs.

The researchers further explored whether this molecular design could improve flexible solar cells. Strong molecular packing in conventional ETLs can make thin films vulnerable to cracking under repeated deformation. In contrast, the less crystalline H75-DMA films better accommodate mechanical strain, achieving a crack-onset strain above 21% and a toughness of 6.72 MJ m⁻³.

Flexible solar cells incorporating H75-DMA achieved 17.89% power conversion efficiency and retained approximately 83% of their initial efficiency after 2,500 bending cycles at a bending radius of 4.14 mm. These results demonstrate that improved molecular and interfacial design can enhance both photovoltaic performance and mechanical durability.

The material also proved effective in flexible semitransparent solar cells, where transparency and conductivity must be carefully balanced. The smooth, high-surface-energy H75-DMA interface promotes the formation of continuous ultrathin silver electrodes, improving light transmission and electrical performance. The resulting semitransparent devices achieved a power conversion efficiency of 14.97%, an average visible transmittance of 19.28%, and a light-utilization efficiency of approximately 3%.

Another important advantage is the potential to reduce electrode costs. Silver is commonly used in high-performance organic solar cells, but its relatively high price presents a challenge for cost-effective manufacturing. By replacing the silver cathode with copper, the researchers demonstrated H75-DMA-based solar cells with 18.65% efficiency, retaining approximately 97% of the performance of their silver-electrode counterparts. This finding shows that appropriate interfacial engineering can support the use of less expensive electrode materials without a major efficiency penalty.

Rather than optimizing efficiency alone, this study demonstrates how a single molecular design strategy can address several practical limitations of organic photovoltaics. By combining controlled molecular packing, improved chemical stability, mechanical flexibility, and compatibility with copper electrodes, H75-DMA offers a versatile approach to high-performance organic solar cells.

Further improvements in large-area processing and long-term operational reliability will be important for practical implementation. Nevertheless, this work establishes a promising design framework for developing efficient, durable, flexible, and more cost-effective organic photovoltaic technologies.

Title: Polar-Twisted Electron-Transport Layer Simultaneously Breaks Efficiency-Flexibility-Cost Limits in Organic Solar Cells
Journal Name: Nano-Micro Letters
DOI: https://doi.org/10.1007/s40820-026-02330-5
Article Publication Date: Aug 13, 2026
Archivos adjuntos
  • Polar-twisted H75-DMA electron-transport layers enable high-performance organic solar cells
  • Photovoltaic performance and stability of organic solar cells with different electron-transport laye
  • Flexible, semitransparent, and copper-electrode organic solar cells enabled by H75-DMA
16/11/2026 ScholarCAST
Regions: Asia, China
Keywords: Science, Chemistry, Physics

Disclaimer: AlphaGalileo is not responsible for the accuracy of content posted to AlphaGalileo by contributing institutions or for the use of any information through the AlphaGalileo system.

Testimonios

We have used AlphaGalileo since its foundation but frankly we need it more than ever now to ensure our research news is heard across Europe, Asia and North America. As one of the UK’s leading research universities we want to continue to work with other outstanding researchers in Europe. AlphaGalileo helps us to continue to bring our research story to them and the rest of the world.
Peter Dunn, Director of Press and Media Relations at the University of Warwick
AlphaGalileo has helped us more than double our reach at SciDev.Net. The service has enabled our journalists around the world to reach the mainstream media with articles about the impact of science on people in low- and middle-income countries, leading to big increases in the number of SciDev.Net articles that have been republished.
Ben Deighton, SciDevNet
AlphaGalileo is a great source of global research news. I use it regularly.
Robert Lee Hotz, LA Times

Trabajamos en estrecha colaboración con...


  • The Research Council of Norway
  • SciDevNet
  • Swiss National Science Foundation
  • iesResearch
Copyright 2026 by DNN Corp Terms Of Use Privacy Statement