Alpha 981 > Item Display (de-DE)

Contributing to solve the heat concentration problem in power semiconductors

In high-performance CPUs used in large servers and power semiconductors used in inverters for hybrid electric vehicles (HEVs), as the integration density rises and the higher the power consumption becomes, the semiconductor package is also becoming smaller. Therefore, the power consumption per area of the semiconductor increases. As a result, the heat generation density increases, and the current situation is that the heat removal limit from the device is approaching.

JST commissioned the company-led phase NexTEP-B type development project of Adaptable and Seamless Technology Transfer Program through Target-driven R&D (A-STEP*) "high-performance in-vehicle cooler with spontaneous cooling promotion mechanism" to Lotus Thermal Solutions Co., Ltd. to proceed the practical development based on the research results of Professor Kazuhisa Yuki et al. of Sanyo-Onoda City University.

In the research by Professor Yuki et al., they realized the structure hard for occurring the film boiling by engraving about 1 mm wide grooves at a regular interval on a heat conductor, such a copper, which contacts with a heating element, and combining it with a lotus metal. Lotus Thermal Solution has established a method that determines the appropriate groove cross-sectional areas and pore diameters according to the refrigerant, and developed a highly efficient boiling immersion cooler (1) using lotus metals (2). Silicon carbide (SiC), which is expected as a next-generation power semiconductor, has a heat generation density of 300 to 500 watts per square centimeter (W/cm2). Thus, to use SiC in devices, a cooler with a critical heat flux (CHF) (3) larger than this heat generation density is required. In this development, we succeeded in increasing CHF from about 200 W/cm2 of the conventional cooler to 530 W/cm2 or more by using the boiling promotion technology using lotus metals.

The boiling immersion cooler prototyped in this development has the capability to cool the inverter with Si semiconductors and SiC semiconductors and is expected as a technology to solve the heat concentration problem of in-vehicle power semiconductors with increasingly high heat generation density. Furthermore, this technology is considered as a highly efficient cooling technology for CPUs for conventional workstations and large-scale servers.

(1) Boiling immersion cooling
This is a method that a liquid refrigerant is boiled with the heat of a heat source and then cooled. The conventional cooling method uses the temperature difference for heat transfer from the heat source to the refrigerant such as water or air, and it cools by natural convection or forced convection. However boiling cooling can utilize latent heat of evaporation (heat of vaporization) when vaporizing; therefore, it is said to have cooling capacity several times that of the conventional method.

(2) Lotus metal
This is a lotus root-like porous metal in which many elongated pores are arranged in the same direction. It has cooling characteristics owing to a refrigerant flowing through the pores. When a molten metal containing hydrogen is solidified, pores are formed by hydrogen that cannot completely be dissolved in the molten metal. Utilizing this phenomenon, lotus metals can be produced at a low cost.

(3) Critical Heat Flux(CHF)
When the heat load increases in boiling immersion cooling, the nucleate boiling with a good heat transfer efficiency cannot be maintained at certain point, and suddenly transitions to film boiling where the heating surface is covered with a vapor film. The heat flux (heat flow per unit area, unit [W/cm2]) at the transition point is called the critical heat flux.

*A-STEP is a technology transfer support program whose aim is to put the research results by public research institutes into practical applications as important technology in the national economy, and thus to give some of their profit back to society.
For detailed information, see
Risako Kibushi, KazuhisaYuki, Noriyuki Unno, Tetsuro Ogushi, Masaaki Murakami, Tomiyuki Numata, Takuya Ide and Hikaru Nomura,
“Enhancement of the critical heat flux of saturated pool boiling by the breathing phenomenon induced by lotus copper in combination with a grooved heat transfer surface”,
International Journal of Heat and Mass Transfer,
Published online Volume 179, November 2021, 121663,
doi: 10.1016/j.ijheatmasstransfer.2021.121663
Angehängte Dokumente
  • Figure 1. Relationship between cooling technology and heat fluxThis figure demonstrates the immersion cooling performance when using water as boiling refrigerant. The cooling performance is 50 times or more higher than that of the conventional water flow cooling without boiling, and exceeds the heat flux that is 2 times higher than that of the conventional flow boiling of water.  ©Lotus Thermal Solution
  • Figure 2. Cooling mechanism by two-phase immersion Combination of the grooved heat transfer surface with the lotus copper with high thermal conductivity leads to both the enhancement of boiling heat transfer and the prevention of a film boiling (limit of the boiling heat transfer). (a) Lotus-root-like porous metal with unidirectional pore structure (b) Self liquid supply from the top of the lotus copper is induced by vapor discharge from the grooves.   ©Lotus Thermal Solution
  • Figure 3. Relationship between cooling performance and temperature of cooled surface Relationship between heat flux and temperature of a cooling surface was evaluated in cases of water (circle in red) and fluorine-based refrigerant (triangle in blue) (a) Regime for server cooling (b) Regime for Si power electronics (c) Regime for SiC power electronics for EVs and HEVs ©Lotus Thermal Solution
Regions: Asia, Japan
Keywords: Applied science, Technology, Business, Automotive, Electronic hardware & software, Other transport


We have used AlphaGalileo since its foundation but frankly we need it more than ever now to ensure our research news is heard across Europe, Asia and North America. As one of the UK’s leading research universities we want to continue to work with other outstanding researchers in Europe. AlphaGalileo helps us to continue to bring our research story to them and the rest of the world.
Peter Dunn, Director of Press and Media Relations at the University of Warwick
AlphaGalileo has helped us more than double our reach at SciDev.Net. The service has enabled our journalists around the world to reach the mainstream media with articles about the impact of science on people in low- and middle-income countries, leading to big increases in the number of SciDev.Net articles that have been republished.
Ben Deighton, SciDevNet
AlphaGalileo is a great source of global research news. I use it regularly.
Robert Lee Hotz, LA Times

Wir arbeiten eng zusammen mit...

  • BBC
  • The Times
  • National Geographic
  • The University of Edinburgh
  • University of Cambridge
Copyright 2021 by DNN Corp Terms Of Use Privacy Statement